How to wipe stitches on tiles: practical tips
The most difficult areas of repair in most cases are the bathroom and kitchen. It takes a lot of expensive materials, as well as time for the entire list of necessary works.
In addition, beginners often have questions about how to wipe the seams on the tile, since the accuracy of this operation largely depends on the attractive aesthetic appearance of the room.
What you need to do before you start
Bear in mind that hurry before thisan important event is not necessary. Fresh tiles should "stick" to the wall for at least a week. Yes, modern varieties of glue allow to make grout already on the fifth day, but it's still better to wait longer. And even more so do not do it the next day after packing. By this, by the way, many "shabashniki" are famous.
Before you wipe the seams on the tile, you needcarefully clean its edges. Remove the dried pieces of glue as cleanly as possible, remove dirt and the entire collection of fingerprints. Do it handy with the help of a sharp clerical knife, immediately removing all the dirt with a vacuum cleaner. After that, the stitches are carefully wiped with a soft sponge.
We prepare grout
Follow the instructions on the package, prepare the mixture. Most often, about 300 ml of water is taken per kilogram of trowelling.
For this purpose, a capacitance of sufficient volume is taken, init is poured water and mixed with a wooden stick before the formation of the funnel. A mixture is poured into it in a thin stream. It is necessary to knead until it reaches the density of a good sour cream. After that, we leave it alone for five minutes, after which we again interfere.
We are working!
Since it is necessary to wipe the seams on the tile withwith the utmost care, you should use a rubber spatula. Surplus is washed from the edges, again pressing into the seams. When they are completely filled, we remove the surplus material again, moving to the next section of the work. If you do this for the first time, it's best to try your hand at a small section of the wall.
We wait about 20 minutes, then proceed towashing. By the way, before you wipe the seams on the tile, do not forget to buy enough soft sponges for washing dishes, as they will need repeatedly!
Wetting and carefully wringing one of them, carefullywe wash off the remains of the trowelling mixture from the seams. It is very important not to hurry up and as carefully as possible to squeeze out the sponge, otherwise the dried water will form incredible patterns on the tile.
So we found out how and how the seams between the tiles wipe. Many workers stop there, but we will go to the victorious end, having done our job perfectly!
To do this, you need to select a small segmenthose from a dropper or something like that will fit perfectly into the seam. Pressing the selected tool of labor into it, you will form an ideal pattern of all the seams on the tile. This work is a little boring, but the result turns out to be extremely beautiful!
By the way, how much does it cost to wipe the seams of tiles? It all depends on the composition you use and your aesthetic preferences. So, the cheapest grouting costs about a hundred rubles for a couple of kilograms, whereas a kilogram of the finished mixture can have a cost five times higher.